Notch Skid Loader Buckets

   Low Profile Dirt    Low Profile Utility    Low Profile Utility XL Low Profile Utility Grapple

  Material Bucket     Material Bucket Grapple    High Volume    High Volume Grapple

Low Profile Dirt Bucket

• Recommended for loaders with operating capacity of 3,000 lbs or less

• Constructed with rolled back

• Box 21" high x 36" deep

• 3/4x6 Cutting Edge with holes to accept bolt on cutting edge (sold separately)

• Universal attachment standard

• Other attachments available

• Constructed of High Tensile Steel

• Capacities and Measurements are Approximate

• Available Sizes

  • 60", 66", 72", 78", 84", 90", 96", & 102"

Additional Photos

Box 20" High x 36" Deep	Universal Quick Attachment	3/4" x 6 " cutting edge with holes to accept bolt on cutting edge
Rolled to design, no sharp corners	with Teeth	with Teeth

Back to top of Page

Low Profile Utility Bucket

• Recommended for loaders with operating capacity of 3,000 lbs or less

• Constructed with rolled back

• Box 23 1/2" high x 38" deep or 42" deep

• 3/4x6 Cutting Edge with holes to accept bolt on cutting edge (sold separately)

• Universal attachment standard

• Other attachments available

• Constructed of High Tensile Steel

• Capacities and Measurements are Approximate

• Available Sizes

  • 60", 66", 72", 78", 84", 90", 96", & 102"

Additional Photos

Box 20" High x 36" Deep	Universal Quick Attachment	3/4" x 6 " cutting edge with holes to accept bolt on cutting edge
Rolled to design, no sharp corners

Back to top of Page

Low Profile Utility Bucket Extra Large

• Recommended for loaders with operating capacity of 3,000 lbs or less

• Constructed with rolled back

• Box 23 1/2" high x 48" deep

• 3/4x6 Cutting Edge with holes to accept bolt on cutting edge (sold separately)

• Universal attachment standard

• Other attachments available

• Constructed of High Tensile Steel

• Capacities and Measurements are Approximate

• Available Sizes

  •  78", 84", 90", 96", & 102"

Additional Photos

3/4" x 6 " cutting edge with holes to accept bolt on cutting edge	Rolled to design, no sharp corners

Back to top of Page

Low Profile Utility Grapple Bucket

• Available Sizes: 60", 66", 72", 78", 84', 90", 96", 102"

• Recommended for loaders with operating capacity of 3000 lbs or less

• Constructed of high tensile steel

• Bucket 23 1/2"" High x 38" Deep

• All Pivot Points are greasable

• Twin Cylinders with cased greasable ends

• Cylinder covers protect cylinders and hoses

• Two 1 ¼" Pivot Pins with Bushings (greasable)

• Constructed with rolled back

• 3/4"x6" cutting edge with to accept bottom cutting edge

• Universal attachment standard, other attachments available

	Bucket 21" High x 36" Deep	1 1/4" Pivot Pins with Bushings (greasable)
3/4" x 6" cutting edge with holes to accept bottom cutting edge

Back to top of Page

Material Bucket

• Recommended for loaders with operating capacity of 3,000 lbs or less

• Constructed with rolled back

• Box 30" high x 42" deep

• 3/4 x6 cutting edge with holes to accept bolt on cutting edge (sold separately)

• Slotted back for better visibility of cutting edge

• Universal attachment standard

• Other attachments available

• Constructed of High Tensile Steel

• Capacities and Measurements are Approximate

• Available Sizes

  • 72", 78", 84", 90", 96", 102", 108" & 120"

Additional Photos

Slotted back for better visibility of cutting edge		Box 30" High x 42" Deep
Universal Quick Attachment

Material Bucket with Grapple

Additional Pictures

Back to top of Page

High Volume Bucket

• Recommended for loaders with operating capacity of 2,500 lbs or less

• Constructed with rolled back

• Box 44" high x 48.5" deep

• 3/4 x6 cutting edge with holes to accept bolt on cutting edge (sold separately)

• Slotted back for better visibility of cutting edge

• Universal attachment standard

• Other attachments available

• Constructed of High Tensile Steel

• Capacities and Measurements are Approximate

• Available Sizes

  •  72", 78", 84", 90", 96", 102", 108", 120" & 132"

Additional Photos

Box 44' High x 48.5" Deep	Steps for easy access on both sides of bucket	Slotted back for better visibility of cutting edge
	Universal Quick Attachment

Back to top of Page

High Volume Grapple Bucket

• Recommended for loaders with operating capacity of 2,500 lbs or less

• Constructed with rolled back

• Box 44" high x 48.5" deep

• Grapple opening is 71"

• 3/4 x6 cutting edge with holes to accept bolt on cutting edge (sold separately)

• Optional Replaceable Teeth on cutting edge (pictured)

• Slotted back for better visibility of cutting edge

• Universal attachment standard

• Other attachments available

• Constructed of High Tensile Steel

• Capacities and Measurements are Approximate

• Available Sizes

  •  72", 78", 84", 90", 96", 102", 108", 120" & 132"

Additional Photos

Back to top of Page